Six Roller Five Crusher
Maximum feed：less than90mm
production capacity：2-500(t/h)
Features：It is characterized by low maintenance cost, large crushing ratio, reliable performance, less dust and low noise.
Applicable materials：Coke, coal, ceramic raw materials, ores, water slag, gypsum, clay, salt, chemical raw materials and other solid materials.
24-hour service hotline
Click to get a quoteSix Roller Five Crusher product description
Six rolls and five crusher is suitable for ultra-fine crushing of solid materials with compressive strength less than 2,400Mpa and water less than 30%, such as coke, coal, ceramic raw materials, ores, water slag, gypsum, clay, salt, chemical raw materials and other solids, with low maintenance cost, large crushing ratio, reliable performance, low dust, low noise and other characteristics.
The six roller surfaces are divided into surfaced rollers, studded alloy rollers or flat rollers, which can be selected and combined according to the user's requirements for particle size, and are suitable for ultra-fine crushing operations with a feed size of less than 90 mm and a finished product size of 0.1-5 mm. It is suitable for ultra-fine crushing operation with feed size less than 90 mm and finished product size 0.1-5mm. Such as mining industry crushing quartz stone, iron ore; ceramic industry crushing feldspar; thermal power plant crushing limestone; cement plant crushing slag; building materials plant crushing gypsum; chemical industry crushing all kinds of chemical raw materials, etc.; or similar crushing occasions with the above.
Six Roller Five Crusher working principle
Six rolls and five crushing crusher utilizes six high-strength wear-resistant alloy crushing rolls, which rotate relative to each other to produce high squeezing force and shear force to crush materials. After the material enters into the top two rolls V crushing chamber, it is squeezed by the relative rotation of the upper two rolls, and the material is squeezed and ground for the first time (coarse crushing), and then it enters into the relative rotation of the two and three rolls V crushing chamber for the second squeezing and grinding (fine crushing), and then it enters into the three and four rolls V crushing chamber for the third squeezing, and then it enters into the four and five rolls V crushing chamber for the fourth squeezing, and then it enters into the five rolls V crushing chamber for the fifth squeezing and shearing, and then it enters into the six rolls V crushing chamber for the fifth squeezing and shearing, and finally it enters into the five, After entering into the V-type crushing chamber of three or four rolls for the third squeeze, entering into the V-type crushing chamber of four or five rolls for the fourth squeeze, and finally entering into the V-type crushing chamber of five or six rolls for the fifth squeeze, shearing and grinding (ultra-fine crushing), the product will be crushed into the required granularity and discharged from the discharge.Six Roller Five Crusher Technical Parameters
| number | Specification |
Feed size （mm） |
Output granularity tunable（mm） |
production capacity （t/h） |
Motor power （Kw） |
Protection mode | transmission method |
| 1 | 6PGS-10PT | ＜20 | 0.1-5 | 2-30 | 33-45 | sprung |
triangle or coupling |
| 2 | 6PGS-30PT | ＜40 | 0.1-5 | 5-60 | 52-67 | ||
| 3 | 6PGS-50PT | ＜40 | 0.1-5 | 8-90 | 67--82 | ||
| 4 | 6PGS-60PT（Y） | ＜60 | 0.1-5 | 12-120 | 82-100 |
sprung or hydraulically |
|
| 5 | 6PGS-80PT（Y） | ＜60 | 0.1-5 | 20-180 | 100-132 | ||
| 6 | 6PGS-100PT（Y） | ＜80 | 0.1-5 | 30-220 | 132-165 | ||
| 7 | 6PGS-120PT（Y） | ＜90 | 0.1-5 | 45-320 | 165-200 | ||
| 8 | 6PGS-150PT（Y） | ＜90 | 0.1-5 | 55-400 | 200-250 | ||
| 9 | 6PGS-180PT（Y） | ＜90 | 0.1-5 | 70-500 | 242-300 |
- durable
- make fast
- easy maintenance
- Few faults
- 24-hour sales hotline:+8618053687318
- get a quote
Recommended Products
Hotline：+8618053687318click to call
Copyright: Shandong Huaji Heavy Industry Co., Ltd. 24-hour service hotline:+8618053687318 E-mail：jczg@sdjiuchang.com