Fine Jaw Crusher
Maximum feed：＜450mm
production capacity：15-300(t/h)
Features：It is characterized by large crushing ratio, low maintenance cost, low power consumption and reliable performance.
Applicable materials：It is suitable for crushing hard materials (compressive strength <300Mpa), such as: iron ore, steel slag, phosphorite, copper ore, silica ore, limestone, quartzite, ceramics, and its hardness of the solid materials of the coarse and medium crushing o
24-hour service hotline
Click to get a quoteFine Jaw Crusher product description
Fine Jaw Crusher is suitable for crushing hard materials (compressive strength <300Mpa), such as: iron ore, steel slag, phosphate rock, copper ore, silica ore, limestone, quartzite, ceramics and its hardness equivalent to the coarse and medium crushing operations of solid materials, such as a variety of beneficiation plant in the middle of the block of material in the fine crushing, the cement plant in the middle of the block of material in the fine crushing and so on, has the advantages of a large crushing ratio, the use of low maintenance costs, low power consumption, reliable performance and so on.Fine Jaw Crusher working principle
Fine Jaw Crusher is driven by the motor through the belt and pulley to drive the eccentric shaft to make the movable jaw move up and down, when the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so that the movable jaw plate to the fixed jaw plate close to the formation of the crushing cavity, then the materials entering the crushing cavity are crushed by extrusion; when the movable jaw downward, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate, under the action of the tie rod and the spring, leaves the fixed jaw plate, and the crushed materials are discharged from the bottom of the crushing cavity, so that the movable jaw is continuously driven by the motor to make the cycle of operation to crush the materials.Fine Jaw Crusher Technical Parameters
| Model |
Inlet size （mm） |
Feed size （mm） |
Output granularity （mm） |
production capacity （t/h） |
Motor power （Kw） |
| PEX-250×750 | 750×250 | 210 | 25-60 | 15-35 | 22 |
| PEX-250×1000 | 1000×250 | 210 | 25-60 | 16-45 | 30 |
| PEX-250×1200 | 1200×250 | 210 | 25-60 | 20-60 | 37 |
| PEX-300×1300 | 1300×300 | 260 | 25-90 | 25-90 | 45 |
| PEX-500×1500 | 1500×500 | 450 | 25-90 | 30-120 | 75 |
| PEX-500×2000 | 2000×500 | 450 | 25-100 | 40-120 | 90 |
- durable
- make fast
- easy maintenance
- Few faults
- 24-hour sales hotline:+8618053687318
- get a quote
Recommended Products
Hotline：+8618053687318click to call
Copyright: Shandong Huaji Heavy Industry Co., Ltd. 24-hour service hotline:+8618053687318 E-mail：jczg@sdjiuchang.com