Coke Cutter
Maximum feed：＜800mm
production capacity：10-1000(t/h)
Features：It is characterized by low maintenance cost, no requirement for water, large crushing ratio, reliable performance, less dust and low noise.
Applicable materials：It is suitable for medium or coarse crushing occasions where the feed size is less than 800mm and the finished product size is 10-100mm (adjustable), requiring less powder and more particles.
24-hour service hotline
Click to get a quoteCoke Cutter product description
The coke cutting machine is equipped with two tooth rolls, and the tooth roll surface is divided into large (small) wolf teeth, coke cutting special teeth, ring teeth, large plate teeth, etc. It is suitable for the medium or coarse crushing occasions where the feed size is less than 800mm, and the finished product size is required to be 10-100mm (adjustable), and the requirement of less powder and more particles. It is characterized by low maintenance cost, no requirement for water, large crushing ratio, reliable performance, less dust and low noise.Coke Cutter working principle
The coke cutting machine utilizes two wear-resistant crushing rollers, which rotate relative to each other to produce high squeezing force to crush materials. After the materials enter the gap between the two rollers (V-shaped crushing chamber), they are subjected to squeezing force and shear force by the relative rotation of the two rollers, and then the coke will be crushed into the required granularity by squeezing, shear and grinding, and then discharged from the discharge port.Coke Cutter Technical Parameters
| number | Model |
Feed size （mm） |
Output granularity adjustable（mm） |
production capacity （t/h） |
Motor power Kw |
Protection mode | transmission method |
| 1 | 2PG-10CT | ＜120 | 10-50 | 2-20 | 6-8 | sprung | triangle or coupling |
| 2 | 2PG-30CT | ＜120 | 10-50 | 6-40 | 8-15 | ||
| 3 | 2PG-50CT | ＜200 | 10-60 | 10-80 | 22-37 | ||
| 4 | 2PG-60CT | ＜300 | 10-80 | 20-150 | 30-45 | ||
| 5 | 2PG-80CT(Y) | ＜400 | 10-100 | 30-200 | 60-75 | Springs and hydraulics | |
| 6 | 2PG-100CT(Y) | ＜300 | 10-90 | 40-280 | 75-90 | ||
| 7 | 2PG-120CT(Y) | ＜400 | 10-120 | 50-350 | 90-110 | ||
| 8 | 2PG-150CT(Y) | ＜600 | 10-150 | 65-450 | 110-150 | ||
| 9 | 2PG-220CT(Y) | ＜800 | 10-180 | 80-600 | 150-180 | ||
| 10 | 2PG-350CT(Y) | ＜900 | 10-200 | 90-800 | 220-280 | ||
| 11 | 2PG-500CT(Y) | ＜1200 | 20-300 | 200-2500 | 250-320 | ||
| 12 | 2PG-800CT(Y) | ＜1200 | 20-300 | 300-3500 | 320-400 | ||
| 13 | 2PG-1200CT(Y) | ＜1200 | 20-300 | 400-5000 | 600-800 |
- durable
- make fast
- easy maintenance
- Few faults
- 24-hour sales hotline:+8618053687318
- get a quote
Recommended Products
Hotline：+8618053687318click to call
Copyright: Shandong Huaji Heavy Industry Co., Ltd. 24-hour service hotline:+8618053687318 E-mail：jczg@sdjiuchang.com